Using Hp Maxilife To Diagnose Problems; Pre-Boot Check Error Messages - HP Workstation x2000 Getting Started Manual

Figure 3-1
NOTE
Troubleshooting Your Workstation

Using HP MaxiLife to Diagnose Problems

Using HP MaxiLife to Diagnose Problems
Your HP MaxiLife LCD Status Panel can help you to diagnose problems
with your Workstation, even when you are unable to get your system and
monitor working properly. It also provides system information you may
need to obtain support.
MaxiLife Status Panel
LCD Scroll Button
Reset Button
Hard Disk Activity Light
Press one of the LCD control buttons to display the menu. Use the scroll
button to scroll through the menu items, then use the select button to
select the item required. For more information on how to use the
MaxiLife display, refer to the x2000 Technical Reference manual provided
on the HP Workstations web page at

Pre-Boot Check Error Messages

When you press your Workstation's on/off button, HP MaxiLife checks
your system before it initiates the start-up sequence. The pre-boot
diagnostic tests are run in order of priority with respect to their
importance to computer functions. The first detected error displays a
message on the LCD status panel. If this happens, one of the following
error messages could appear.
Refer to the x2000 Technical Reference Manual (at
www.hp.com/workstations/support
internal components of the Workstation.
56
LCD Select Button
Power On/Off Button
www.hp.com/workstations/suppor
) for information on how to access the
t
Chapter 3