Troubleshooting Your HP Visualize Linux Workstation
If Your HP Visualize Linux Workstation Does Not Start Properly
LCD Error
Messages
No CPU 1
Check that boot processor is
correctly installed in socket 1.
CPU Socket 2
Check that the terminator is
correctly installed in socket 2.
CPU Freq.
Check that the processors
installed are the same speed
(frequency).
CPU Type
Check that the processors
installed have the same cache
voltage.
4. Replace the cover.
5. Reconnect all cables and power cords.
6. Turn on the display and computer.
32
Action
Refer to "Installing a
Processor" in the Upgrade and
Configuration Guide.
Refer to "Installing a
Processor" in the Upgrade and
Configuration Guide.
Reference
Chapter 3