Creating A Rescue Disk Set - HP XL Class 500/550MHz User Manual

Setting Up and Using Your HP Visualize Linux Workstation
Starting and Stopping Your HP Visualize Linux Workstation
To initialize your software:
1. Turn on the display first, and then the HP V
Workstation.
When you switch on the computer, it carries out the Power-On-Self-Test
(POST). If you wish to view the POST details, press
Summary Screen. If there is an error in the POST, the error will
automatically be displayed. For details, see the section "If a POST Error
Message is Displayed" in the chapter "Troubleshooting Your HP
Visualize Linux Workstation."
If you have set a password in the Workstation's Setup program, the
password prompt displays after the POST has completed. If the
Password prompt is displayed, type your password and press
to be able to use the Workstation.

Creating a Rescue Disk Set

During the initialization of your software, it is very important that you
create a Rescue Disk Set for the operating system, when prompted. HP
recommends that you use new diskettes for this purpose.
To create these back-up diskettes, follow instructions that appear in the
HP Linux Setup and Recovery Guide (HP Part Number A1297-90010)
that is included with your Workstation.
12
Linux
ISUALIZE
to get the HP
Chapter 1