Package Components; Other Tool Products Required For Development - Renesas M30830T-RPD-E User Manual

2.2 Package Components

The M30830T-RPD-E package consists of the following items. When unpacking, check to see if your
M30830T-RPD-E contains all of these items.
Table 2.1 Package components
M30830T-RPD-E emulation pod main unit
FLX120-RPD flexible cable for connecting emulator main unit
FLX160-PRB converter board for connecting FLX160 to M30800T-PTC
(mounted on FLX160)
M30800T-PTC converter board for 100-pin LCC package
OSC-2 oscillator circuit board (bare-board)
IC61-1004-051 100-pin LCC socket
Hardware tool user registration FAX sheet (English)
Hardware tool user registration FAX sheet (Japanese)
M30830T-RPD-E user's manual (this manual)
M30830T-RPD-E user's manual (Japanese)
* Please keep the M30830T-RPD-E's packing box and cushion material in your place for reuse at
* If any of these items are missing or found faulty, please contact your local distributor.
* If there is any question or doubt about the packaged product, contact your local distributor.
* For purchasing the IC61-1004-51 or for technical information, contact Yamaichi Electronics Co.,

2.3 Other Tool Products Required for Development

To bring forward programs development on the M32C/81, 82, 83 Group MCUs, the products listed
below are necessary in addition to those contained package above. Get them separately.
Table 2.2 Other tool products
* To purchase these products, contact your nearest distributer.
a later time when sending your product for repair or other purposes. Always use these packing
box and cushion material when transporting the M30830T-RPD-E.
Ltd. (http://www.yamaichi.co.jp/e/index.shtml)
Product
Emulator main unit
Emulator debugger
144-pin 0.5-mm-pitch LQFP
(144P6Q-A)
100-pin 0.5-mm-pitch LQFP
(100P6Q-A)
100-pin 0.65-mm-pitch QFP
(100P6S-A)
Item
Product name
PC4701
M3T-PD308 (V.3.00 or later)
M3T-FLX-144NSD
M3T-100LCC-QSD
M3T-100LCC-DMS
+ M3T-FLX-100NSD
M3T-F160-100NSD
M3T-100LCC-DMS
+ M3T-DUMMY100S
M3T-100LCC-DMS
+ M3T-DIRECT100S
M3T-100LCC-DMS
+ M3T-FLX-100NRB
( 19 / 74 )
Quantity
Notes
Required
Required
Required according to the foot
pattern of the target system
(see 3.6 "Connecting the Target
System" on page 36)
1
1
1
1
1
1
1
1
1
1