Table of Contents
Advertisement
Chapter 4
4
On 2270P2 with 2 PCI slot
4
Note: Using a PCIe or PCI riser card, users have
choice of either PCI Express x1 or PCI expansions.
1 PCIe is supported on model LEC-2270E
1.
2 PCI are supported on model LEC-2270P2
2.
Both PCI or PCIe support the Max. Dimension
3.
as the following illustrated and the Max.
Power consumption reserved for expansion is
25W in total.
Embedded and Industrial Computing
Installing the Hard Disk
5
The system can accommodate one Serial-ATA disk. Follow
these steps to install a hard disk into the system:
1.
Take out the hard disk tray and fix the hard disk on
the tray with 4 mounting screws as illustrated in the
following picture.
2.
Plug the Serial-ATA cable to the hard disk.
3.
Place the hard disk back to the system's chassis and fix
it with the mounting screws.
4.
Connect the Serial-ATA power and data disk cables to
the Serial-ATA power and disk connectors on the main
board respectively.
5
4
Hardware Setup
1
2
3
23
Advertisement
Table of Contents
