Wireless Module Installation; 3G Sim Card Installation; Pci/Pcie Riser Card Installation; On 2270E With One Pcie Slot - Lanner LEC-2270 User Manual

Embedded & industrial computing
Table of Contents

Advertisement

Chapter 4

Wireless Module Installation

1.
Align the wireless module's cutout with the Mini-PCIe
slot notch.
2.
Insert the wireless module into the connector
diagonally.
3.
Hold down the other end of the wireless module and
tighten it with the screws.

3G SIM Card Installation

1.
Unlink the SIM card reader first by sliding it outward.
2.
Flip the SIM card reader diagonally.
3.
Align the cut corner of the SIM card pointing toward
SIM card reader. Make sure the ICs will be in contact
with the SIM card reader.
4.
Insert the
SIM card into the reader and close the tray.
You should feel a click when the SIM card is locked
securely in the SIM card reader.
2
3
Embedded and Industrial Computing
2
3
Lock
Note: To remove the SIM card, slide the card
reader outward to unlock it.

PCI/PCIe Riser Card Installation

The system can accommodate one PCIe expansion (or two
PCI expansion on model P2) module. In order the install
the PCIe expansion module, a low-profile riser card has
to be installed first. Follow these steps to install the riser
card:
1.
Fix the riser card on the bracket with 3 screws.
2.
Install the riser card to the system by connecting the
connectors with the system's PCIEIO1 connector.
3.
Fix the riser card on the board.
4.
Connect the PCIe expansion card to the riser.
5.
Fix the card holder back to the system.

On 2270E with one PCIe slot

2
3
Hardware Setup
4
Unlock
1
22

Advertisement

Table of Contents
loading

This manual is also suitable for:

Lec-2270eLec-2270p2

Table of Contents