Installing The Wireless Module; Installing The 3G Sim Card; Installing The Disk Drive - Lanner LEC-7230 User Manual

Installing the Wireless Module

1. Align the wireless module's key with the Mini-PCIe
slot notch.
2. Insert the wireless module into the connector
diagonally.
3. Fix the wireless module with the screws.

Installing the 3G SIM Card

1. Unlock the SIM card reader first by sliding it outward.
2. Flip the SIM card reader diagonally.
3. Put the SIM card into the reader. The angled corner of
the SIM ensures that the card fits only the correct way
in the reader. Make sure the ICs will be in contact with
the SIM card reader.
4. Close the tray. You should feel a click when the SIM
card is locked securely in the SIM card reader.
Note: To remove the SIM card, push
the card outward to unlock it.

Installing the Disk Drive

The system can accommodate one Serial-ATA disk drive.
Follow these steps to install a hard disk into the system:
1. Align the mounting holes of the HDD/SSD and
that on the LEC-7230 systems as illustrated in the
following picture. Fix the hard disk on the system by
attaching the screws through the back cover from the
outside.
2. Plug the Serial-ATA cable to the disk.
3. Connect the Serial-ATA power and data disk cables to
the Serial-ATA power and disk connectors on the main
board respectively.