Installing The Security Bracket - HP VECTRA VE User Manual

Installing the Security Bracket

The security bracket supplied with the computer can be used to fasten
the computer to your desk.
1 Remove the computer's cover (refer to "Removing and Replacing the
Cover", on page 15).
2 Remove the security bracket from the storage position.
3 Insert the security bracket, from inside the computer, into the slot
shown in the diagram above.
4 Press it firmly until it snaps into place.
5 Install any other accessories before replacing the cover.
2 How to Install Accessories In Your PC
Installing the Security Bracket
Remove the
bracket from the
storage position
Insert the
bracket
in the computer
English
2
39