Port Security Bracket; Installing The Port Security Bracket - HP d325 ST Hardware Reference Manual

Port Security Bracket

The Port Security Bracket can be used to secure access to cables connected to the rear
panel of the computer.

Installing the Port Security Bracket

1. Attach the bottom section of the bracket to the rear of the computer:
a. Hook the tabs on the lower edge of the bottom section of the bracket into the
slots on the rear of the computer
b. Insert the tabs on the upper edge of the bottom section of the bracket into the
slots on the rear of the computer. Push in
bracket locks in place.
Hardware Reference Guide
1
.
2
until the bottom section of the
Security Provisions
D-7