Installing The Security Bracket - HP Vectra VL5 3 User Manual

Installing the Security Bracket

# $ K +
The security bracket supplied with the computer can be used to secure the computer to your
desk.
1. Remove the computer's cover.
2. Insert the security bracket, from inside the computer, into the slot shown in the diagram
below.
3. Press it firmly until it snaps into place.
4. Install any other accessories before replacing the cover.
This may cause a problem if you have a SCSI hard disk system.
#
InstallingtheSecurityBracket.39
$
Installing the Security Bracket
K
Installing the Security Bracket;installing;security bracket;accessories
+
SECTION3:0100
HP Vectra VL5 PC User's Guide - Part 2Error! No text of specified style in document.
42
{bmc help0045.bmp}