Unpacking Your Pc - HP Vectra VE 6/xxx - 8 User Manual

Hp vectra ve 6/xxx series 8, user's guide for minitower models
Hide thumbs Also See for Vectra VE 6/xxx - 8:
Table of Contents

Advertisement

WARNING
Operating System
Installation Tools
1 Setting Up and Using Your PC

Unpacking Your PC

Unpacking Your PC
If you have any doubt that you can lift the PC or display safely, do not
try to move it without help.
PC
1 Unpack all the components.
2 Open out the stabilizing feet and place the PC on a sturdy desk (or
on the floor) near easily accessible power outlets, with enough space
for the keyboard, mouse, and any other accessories.
3 Position the PC so that its rear connectors are easily accessible.
4 Refer to the display's manual for information about the display.
Your PC's operating system is preloaded on your PC's hard disk drive
and is set up when you start your PC for the first time.
No tools are required to set up your PC. However, if you plan to remove
the cover and install accessories, you will probably need a screwdriver.
For further information about installing accessories, refer to "How to
Install Accessories in Your PC", on page 17.
2
English
Typical
Display
Keyboard
Manuals
Mouse

Advertisement

Table of Contents
loading

This manual is also suitable for:

Vectra ve series 8

Table of Contents