Unpacking Your Pc - HP Vectra XA 5/xxx User Manual

WARNING
Operating System
Installation Tools
1 Setting Up and Using Your PC

Unpacking Your PC

Unpacking Your PC
If you have any doubt that you can lift the PC or display safely, do not
try to move it without help.
Computer
1 When you receive your PC, unpack all the components.
2 Place the PC on a sturdy desk near to easily accessible power outlets,
with enough space for the keyboard, mouse, and any other
accessories.
3 Position the PC so that its rear connectors are easily accessible. (You
can place the PC on the floor instead of on the table, if desired.)
4 Refer to the display's manual for information about the display.
Your PC's operating system is preloaded on your PC's hard disk drive.
No tools are required to set up your PC. However, if you plan to install a
disk drive or an accessory board in your PC, you will need a flat-blade
screwdriver. For further information about installing accessories, refer
to chapter 3, "How to Install Accessories In Your PC".
2 English
Typical Display
Keyboard
Manuals
Mouse