Advertisement
面線的穿法
在穿線過程中，請切斷電源。
當誤按動開關時，縫紉機動作會導致人員
受傷。
1. 在穿面線之前轉動上輪，抬高挑線桿。
這樣會使穿線更加容易，並防止面線在
縫紉開始時脫落 。
2. 先穿左側的面線。
P10
Threading the upper thread
Turn off the power switch before threading the upper thread.
The machine may operate if the treadle is depressed by mistake,
which could result in injury.
1.Turn the machine pulley and raise the thread take-UP (1) before
threading the upper thread. This will make threading easier and
it will prevent the thread from coming out at the sewing start.
2.Thread the left-side thread first.
確認線通過各張力盤之間
The thread can be passed
securely in between the
tension discs
線通過棘⽖的內側
Pass the thread on
the inside of the tab
Advertisement
