Replace The Detector Cradle - Honeywell IntelliDoX User Manual

INTELLIDOX DOCKING MODULE
CRADLE AND CALIBRATION INSERT

Replace the Detector Cradle

To replace the cradle, remove the cradle from the IntelliDoX (unscrew the screws and
unplug the connector), and then install the replacement cradle.
1.
2.
HONEYWELL
Disconnect the power cord, network cable, tubing, and inlet filter assemblies from the
IntelliDoX.
Use a screwdriver to unscrew the two screws from the cradle.
USER MANUAL || REPLACE DETECTOR
PAGE 93 OF 119