Table of Contents
Advertisement
INTELLIDOX DOCKING MODULE
Configure Hibernation
You must use Safety Suite Device Configurator or Safety Suite software to create a
configuration file to activate hibernation on insertion. After the configuration file is created,
you can use Safety Suite Device Configurator or Safety Suite software, or a USB flash
drive to transfer the file to one or more modules. When a module is configured to activate
hibernation on insertion, the LCD changes to gray and the hibernation symbol is
displayed. All other module functions are disabled.
Work Plan: Configuring Hibernation
1.
2.
3.
HONEYWELL
Detectors in hibernation mode do not respond to gas. Do not use detectors in
hibernation mode as personal protective equipment (PPE).
Create a hibernation configuration file.
Transfer the hibernation configuration file to one or more modules via Safety Suite
Device Configurator or Safety Suite software, or USB flash drive.
Activate detector hibernation.
USER MANUAL || HIBERNATION
PAGE 74 OF 119
Advertisement
Table of Contents
