Clean And Maintain The Module - Honeywell IntelliDoX User Manual

Docking module
Table of Contents

Advertisement

INTELLIDOX DOCKING MODULE

Clean and Maintain the Module

Before You Begin
1.
2.
3.
4.
Basic maintenance
To maintain the module in good operating condition, perform the following basic
maintenance as required:
1.
2.
3.
Once service is complete, reconnect the power supply. When power is connected, the
LCD activates and self-test is performed.
Replacement Parts and Accessories
Replaceable parts are sold separately. To receive a complete list of replaceable parts
approved for use with this product, contact Honeywell or an authorized distributor, or visit
the product website at
Gas detectors, calibration and purge gas cylinders, and other accessories are sold
separately. To receive a complete list of calibration gases and accessories approved for
use with this product, contact Honeywell or an authorized distributor, or visit the product
website at www.honeywellanalytics.com.
HONEYWELL
Disconnect power before performing maintenance or cleaning.
To avoid personal injury or damage to the module, use only replacement parts and/or
accessories obtained from Honeywell or an authorized distributor.
No user-serviceable parts are inside the module.
If the module is damaged, contact Honeywell or an authorized distributor.
If the equipment is damaged or parts are missing, contact Honeywell immediately.
Substitution of components may impair the safety of the equipment.
Do not attempt to disassemble, adjust, or service the equipment unless instructions
are provided to perform a procedure, or a component is listed as a user-replaceable
component in the user manual. Use only Honeywell replacement components.
Do not expose the equipment to electrical shock or severe and/or continuous
mechanical shock.
Do not immerse the equipment in liquids.
Maintain a log of all maintenance that is performed.
Clean the exterior with a soft, damp cloth.
Do not immerse in liquids.
Do not use solvents, soaps or polishes.
Confirm that the inlet filter is free of dirt. Replace if required.
www.honeywellanalytics.com
USER MANUAL || MAINTENANCE
PAGE 98 OF 119

Advertisement

Table of Contents
loading

Table of Contents