Adjust Time And Date Settings - Honeywell IntelliDoX User Manual

INTELLIDOX DOCKING MODULE
SAFETY SUITE DEVICE CONFIGURATOR AND SAFETY SUITE SOFTWARE

Adjust Time and Date Settings

Via Safety Suite Device Configurator Software
Follow the instructions in this section when you want to adjust the module time and date
settings automatically via Safety Suite Device Configurator software. For connected
modules, you must adjust time and date settings for each module in the group.
You must use Safety Suite Device Configurator when you want to:
•
•
•
For more information, refer to the Safety Suite Device Configurator operator manual.
Via Safety Suite
Adjust the module's time and date settings automatically via the Safety Suite Device
Configurator. For connected modules, you must adjust time and date settings for each
module in the group.
NOTE: You must use Safety Suite Device Configurator when you want to:
1.
2.
HONEYWELL
Configure a module or detector to adjust for Daylight Savings Time;
Synchronize a module time and date to a PC; and
Configure compatible detectors to synchronize time and date settings to the module
when inserted.
• Configure a module or detector to adjust for Daylight Savings Time
• Synchronize a module time and date to a PC
• Configure compatible detectors to synchronize time and date settings to the
module after inserting the device.
From the main window, click IntelliDoX Configuration.
From the IntelliDoX Configuration panel, click DATE & TIME, and then select
SYNCHRONIZE WITH SERVER. A Date and time sync successfully message is
displayed.
USER MANUAL || CONFIGURE SETTINGS VIA
PAGE 63 OF 119