Table of Contents
Advertisement
Ingeteam
4. Preparation for installing the unit
When deciding the location of the unit and planning your installation, you must follow a set of guidelines based on
the specifications of the unit. These guidelines are summarized in this chapter.
4.1. Environment
•
Situate the units in a place which is accessible for installation and maintenance work.
•
Avoid corrosive environments that may affect the proper operation of the unit.
•
Never place any object on top of the unit.
•
Do not expose the inverters to direct sunlight.
4.2. Environmental conditions
Environmental operating conditions indicated in section "2.4. Protection rating and operating temperature" must
be taken into account when choosing the location of the unit.
Take into account that moderate condensation may occasionally occur as a consequence of temperature variations.
For this reason, apart from the unit's own protection, it is necessary to monitor these units once they have been
started up on sites where the conditions described above are not expected to be present.
In the event of condensation, never apply voltage to the unit.
12
Preparation for installing the unit
ABI2014IQM03_ - Installation manual
Advertisement
Table of Contents
