Installing The Ndis 2.01 And Ndis 4 Drivers For Windows 95 Osr2 - HP P Class 733/800/866MHz / 1GHz Administrator's Manual

8 Click on the
9 The selected driver now appears in the driver list and no specific configuration is
10 At this step, the system may prompt for installation disks. You can either insert
11 Windows 95 will ask you to shut down to make the changes effective. Click

Installing the NDIS 2.01 and NDIS 4 Drivers for Windows 95 OSR2

Microsoft Windows 95 OSR2 supports both NDIS 2.01 and NDIS 4 drivers. The HP
Ethernet Family Adapter provides both NDIS drivers to run with Windows 95 OSR2.
CAUTION The NDIS 4 driver is supported on Windows 95 OSR2 only. If you have a previous
version of the Windows 95 operating system, you should install the NDIS 2.01 and/or
NDIS 3.1 driver. See
OSR2" on page 57
To install the PCnet NDIS 2.01 and/or NDIS 4 drivers, follow the instructions given
below:
1 From the Settings menu, start the Control Panel.
2 To run the Network configuration utility, double click on the Network icon.
3 If a driver for the HP Ethernet Family adapter is already installed, select it and
4 Click on the
5 In the Select Network Component Type window, choose
A new Select Network Adapter window is displayed.
button to install the
OK
driver.
Remote Power
needed. Click on the
OK
the appropriate installation diskette(s) or enter the full pathname of Windows 95
installation files preloaded by HP. This pathname is
C:\Windows\Options\Cabs\
shut down and restart.
The installation for Windows 95 is now complete.
"NDIS 2.01, 3.1 and 4 Drivers for Windows 95 and Windows 95
for details.
then remove it by clicking on the
button.
Add
the button.
Add
NDIS 2.01, 3.1 and 4 Drivers for Windows 95 and Windows 95 OSR2
HP Ethernet Family Adapter with LAN
button.
button.
Remove
3 Installing Microsoft Network Drivers
Yes
then click on
Adapter
English
to
59