Artisoft Lantastic Keywords - HP P Class 733/800/866MHz / 1GHz Administrator's Manual

6 Driver Options - Software Keywords
Operating System Keywords

Artisoft LANtastic Keywords

Keyword
Syntax
Name
I/O Address IOBASE
Interrupt IRQ
DMA DMA
@switch-file @switch-file
HELP HELP
VERBOSE VERBOSE
REMOVE REMOVE
BUSTYPE BUSTYPE
Multiplex MPX
Interrupt
106 English
Description
Described previously in "Common Keyword Matrix for the HP Ethernet Family Adapter"
on page 102.
Specifies that further switches are to be taken from a
switch file. Any switches after the @switch-file name
will be used, and the switch settings take precedence
over any settings in the switch file. Switch files may be
invoked from within switch files.
Instructs PCNTLC.EXE to display information about the
valid command line switches. For example: PCNTLC
/Help
Causes the PCNTLC.EXE driver to be installed and
detailed information about the configuration of the
PCNTLC.EXE driver to be displayed. Refer to the
messages section of the LANtastic manual for a detailed
description of the VERBOSE output.
This command removes the PCNTLC.EXE driver from
memory. TSR programs must be removed in the
opposite order they were loaded. For example if
PCNTLC.EXE was loaded followed by AILANBIO, then
AILANBIO must be removed before PCNTLC.
Described previously in "PCNET Driver-Specific Keyword
Matrix" on page 100.
Command used for a communications interface between
TSR programs
Range Default
N/A None
N/A Not Enabled
N/A Not Enabled
N/A Not Enabled
00(ISA) Not Present
01(PnP)
10(VESA)
11(PCI)
12(PCI1)
13(PCI2)
C0-FF h C7