Remote Boot On Windows Nt 4.0 Server With Pxe And Dhcp/Tftp; Client Configuration - HP P Class 733/800/866MHz / 1GHz Administrator's Manual
Ethernet family adapter
Hide thumbs
Also See for P Class 733/800/866MHz / 1GHz:
- Online manual (29 pages) ,
- Installation manual (27 pages) ,
- Supplementary manual (8 pages)
Table of Contents
Advertisement
5 Configuring for Remote Boot
Remote Boot on Windows NT 4.0 Server with PXE and DHCP/TFTP
Remote Boot on Windows NT 4.0 Server with PXE and
DHCP/TFTP
CAUTION
Make sure your computer supports this protocol.
This protocol will be available on your server only if you installed Intel LanDesk
Configuration Manager or any other server package which supports DHCP/TFTP.
For more information on installing and configuring Intel LanDesk Configuration
Manager refer to the Intel online documentation.
Client Configuration
To remote boot from a DHCP/TFTP server, the client PC should have an
appropriate boot ROM and the boot order in the Setup program should have the
DHCP/TFTP server as the first bootable device.
98
English
Advertisement
Table of Contents
