HP P Class 733/800/866MHz / 1GHz Administrator's Manual page 70

4 Installing Other Network Drivers
NDIS 2.01 Driver with FTP PC/TCP 2.x for DOS/Windows
Sample PROTOCOL.INI file:
[PROTMAN]
; Protocol manager
drivername = PROTMAN$
[PKTDRV]
drivername = PKTDRV$
intvec = 0x60
bindings = PCNTND_NIF
[PCNTND_NIF]
; HP Ethernet Family Adapter
DRIVERNAME = PCNTND$
BUSTYPE = PCI1
LED2 = 0x90
The PROTOCOL.INI file must include a section describing the LAN adapter (the
section) and a section describing each of the network products being
PCNTND
run. Each network product section (e.g. NFS-NDIS) must include a
statement.
5 The CONFIG.SYS file must be modified to contain the
load the required drivers (the Protocol Manager, HP NDIS 2.01, and packet driver
converter).
Add the following statements near the end of the CONFIG.SYS file:
DEVICE = C:\FTP\PROTMAN.DOS /I:C:\FTP
DEVICE = C:\FTP\PCNTND.DOS
DEVICE = C:\FTP\DIS_PKT.DOS
Please refer to the FTP PC/TCP for DOS/Windows Installation Guide for more
information about how to customize the CONFIG.SYS file for FTP PC/TCP
software.
The statement for the PROTMAN driver must come before the other
DEVICE
network driver
DEVICE
The parameter in the
/I:
the path to the PROTOCOL.INI file (in this example
70 English
statements.
statement for the PROTMAN file identifies
DEVICE
BINDINGS
statements that
DEVICE
).
C:\FTP