HP P Class 733/800/866MHz / 1GHz Administrator's Manual page 32

2 Installing Novell NetWare Drivers
ODI Driver for Windows for Workgroups Clients
2 Windows for Workgroups must be installed to allow the Novell client to install its
Windows support. However, the Windows for Workgroups network setup requires
the Novell client to be installed to complete the configuration successfully.
a Insert diskette 1 of Windows for Workgroups into the diskette drive. To start
the installation, type the following at the DOS prompt:
A:
SETUP
b Select
Custom Setup
c Select
Networks...
d Select
No Windows support for networks
e Select
Continue
f Choose the
Make all modifications for you
window to make changes to CONFIG.SYS and AUTOEXEC.BAT automatically,
and select
Continue
g Select
Return to MS-DOS
completed.
3 The Netware Client for DOS and Windows should now be installed.
a Insert diskette 1 of the NetWare Client into the diskette drive. To start the
installation, type the following at the DOS prompt:
A:
SETUP
b Select to update the AUTOEXEC.BAT file.
YES
c Select to install the NetWare Windows support.
YES
d Press to continue the installation.
e Insert the LAN Disk when the
press .
f When the driver name
appears, press ENTER to continue with the rest of the NetWare client
Power
installation.
32 English
when prompted for the type of setup to run.
when the Network Setup windows appears.
when the Network Setup window reappears.
.
when the Windows for Workgroups installation is
Insert The Driver Disk
HP Ethernet Family Adapter with LAN Remote
and then click on the
OK
button in the Windows Setup
window appears and
button.