Connecting To A Novell Netware 5.0 Server; Microsoft Windows 95 Sr2.5; Requirements; Device Configuration - HP VL600 - Vectra - 128 MB RAM Installation Manual

Microsoft Windows 95
SR2.5

Connecting to a Novell NetWare 5.0 Server

Microsoft Windows 95 SR2.5

2 Connecting to a Novell NetWare 5.0 Server

Requirements

Operating System
Driver Version
Driver File
Server OS
Client OS

Device Configuration

Device
Configuration 1
Configuration
Interrupt 5
I/O Address 210-21F

Procedure

1 Power on the machine and boot to Windows 95.
2 Insert the driver disk and execute "PREINSTL.EXE".
3 Accept the default values by clicking on "OK".
4 Remove the driver disk and shut down the system.
5 With the HP Vectra turned off, install the network adapter into an ISA slot.
6 Connect the network cable to the newly installed network adapter.
7 Restart the system.
8 Windows 95 will detect the network adapter as "3Com 3C509B EtherLink
III" during start up.
9 Insert the driver disk and click on "Next" to continue the installation.
10 Click on "Finish" to complete driver update.
4
Windows 95 SR2.5
5.26.45
Elnk3nd4.sys
Novell NetWare 5.0 Server
Client v3.1 for Windows 95/98
Configuration 2
11
300-30F