HP P Class 733/800/866MHz / 1GHz Administrator's Manual page 64

4 Installing Other Network Drivers
NDIS 2.01 Driver for Artisoft LANtastic 6.0
Installation for DOS
After pressing
1 Some Artisoft initialization messages will appear on the screen. Press
2 If this is the first installation, you will be prompted for
3 Select any additional LANtastic features you wish to install (see Artisoft
4 At Select Network Adapter, select
5 Insert the HP Ethernet Family Adapter disk into the flexible disk drive and then
6 Insert the appropriate Artisoft LANtastic 6.0 disks when prompted. Press
7 Select
8 Information will appear on the screen. Press
9 Insert the appropriate Artisoft LANtastic 6.0 disk when prompted. Press
10 You will see the "Installation Complete" and "Need to reboot your computer"
11 During the boot sequence you will see the message:
12 Next, you will see some LANtastic configuration messages.
64
at the message to run the install program under DOS:
continue.
. Then, select
Directory
LANtastic manuals for more information). Press
press to continue.
to continue.
OK to perform the installation
to continue.
messages. Press
drive. Press
AMD PCNet Family Ethernet Adapter
NDIS v2.01 MAC Driver, version x.xx
Drivername
and other configuration information.
Station Address
The installation of the NDIS 2.01 driver for Artisoft LANtastic 6.0 is now
complete.
English
KEEP all previous LANtastic setup information
NDIS Support for Network Adapters
to continue. Remove the disk from the flexible disk
to reboot.
Station Name
to continue.
and press .
to continue.
to
and
Target
.
.