Odi Driver With Dos Requester - HP P Class 733/800/866MHz / 1GHz Administrator's Manual

2 Installing Novell NetWare Drivers
ODI DOS Client Driver

ODI Driver with DOS Requester

To install the ODI driver for DOS, follow the instructions below:
1 Locate the Novell DOS Requester "NetWare Client for DOS and MS Windows"
diskettes. These could be labeled "WSDOS_1" and "WSWIN_1". To create these
diskettes from the NetWare CD ROM, follow the NetWare documentation
included with the CD-ROM.
2 Run the NetWare client installation program.
a Insert the number 1 diskette into the drive and run the INSTALL program. For
example, if the NetWare diskette is in drive A, then type:
A:\
INSTALL
b Follow the Novell instructions to fill in the first three fields of the form.
c It is recommended to answer
install program to modify the start-up files. This will make the NetWare client
start up automatically and attach to the server every time the computer is
rebooted. If is entered, the commands to start up the NetWare client will
No
have to be entered manually.
d If Windows is installed on the computer, it is recommended to answer
allow the Novell install program to add Windows support.
3 When asked to select the driver for your network board, remove the Novell
diskette and insert the LAN Disk. Press
window.
4 Select
A:\NOVELL\DOSCLNT
5 The line
HP Ethernet Family Adapter with LAN Remote Power
highlighted. Press
24 English
when asked if you want to allow the Novell
Yes
to bring up the Network Board
then press .
to select the driver (PCNTNW.COM).
to
Yes
will be