Installing Novell Netware Drivers - HP P Class 733/800/866MHz / 1GHz Administrator's Manual

2 Installing Novell NetWare Drivers

Installing Novell NetWare Drivers
Installing Novell NetWare Drivers
This document explains how to install the Novell NetWare Open Data Link Interface
(ODI) drivers required to use the PC with a Novell NetWare LAN.
•
•
When you start your PC for the first time you will be asked to select which type of
network you want to use with your PC. According to your selection the appropriate
drivers and files will be automatically installed. If you want to install network
software at any other time, follow the procedure described below.
If you want to use the DOS-based HP PC as a client on the LAN,
given under "ODI DOS Client Driver" on page
given under "Parallel Transferring ODI DOS Client Driver" on page
If you want to use the OS/2-based HP PC as a client on the LAN,
given under "ODI OS/2 Client Driver" on page
If you want to use the Windows for Workgroups 3.11-based HP PC as a client on the
LAN,
Clients" on page
NOTE Before installing the network drivers, connect the HP Ethernet Family Adapter to
the LAN and set up (configure) the HP Ethernet Family Adapter.
22
If the PC is supplied with the HP LAN Disk, use this disk to install the LAN drivers.
If the PC has preinstalled software on the hard disk, the LAN drivers are supplied
on the PC's hard disk in subdirectories in the
refer to the steps given under "ODI Driver for Windows for Workgroups
31.
English
directory.
\LAN
refer to the steps
23. Alternatively, refer to the steps
36.
refer to the steps
28.