HP P Class 733/800/866MHz / 1GHz Administrator's Manual page 97

3 Start the remote boot service:
a In the Control Panel, choose the Services icon.
b Select the remote boot service, and start it. You may configure it to start
automatically by selecting the startup button.
4 Install the boot block and configurations for the HP Ethernet Family Adapter:
a Open a DOS box under Windows NT Server.
b Insert the LAN Disk in the flexible disk drive. Make this drive the current drive.
c Change to the
\RPL\NTRPL
\RPL\NTRPL
d Type
HPIASRPL C:\WINNT40\RPL
drive and directory where the remote boot service is installed.
e You have now prepared your server, by copying all the files you need to run the
remote boot services from the LAN Disk.
5 Set up the remote boot:
To install other protocols as IPX, or TCP/IP, or to manage your profiles and
workstations, please refer to the Windows NT Server installation on-line help.
Remote Boot on Windows NT Server 4.0 (RPL)
directory of your flexible disk drive by typing
assuming
5 Configuring for Remote Boot
cd
is the
C:\WINNT40\RPL
English 97