Move Of The Sample Support; Machine Equipped With A Chip Collector - Thermo Scientific Haas Mini Mill User Manual

Machine Operation

Move of the Sample Support

1. On the Simatic mobile panel, select SERVICE 2/2 : Holder
2. On the Simatic mobile panel, press High and Down commands to move the sample holder, set the speed
of the holder with the scale on the right.
3. Press on Cleaning position to move the table away to remove the sample chips.

Machine Equipped with a Chip Collector

1. On the Simatic mobile panel, select SERVICE 3/3 : Chip collector
2. On the Simatic mobile panel, press commands to move the chips collector items.
AA83766
Figure 2.12
Figure 2.13
User Manual - Haas Mini Mill
Chapter 2
9