HP Kayak XU04 Supplementary Manual page 19

5 Secure the drive with the four self-retaining screws.
6 Locate the appropriate data cable for the hard disk drive (refer to
page 8).
7 Connect the power cable and the data cable to the rear of the drive.
(The connectors are shaped to go in one way only.)
Data Cable
8 Replace the HP UltraFlow airflow guide (refer to page 5).
9 Install any other accessories before completing the installation.
10 Turn to page 14 to complete the installation.
1 How to Install Accessories In Your HP PC Workstation
Installing Mass Storage Devices
Power Cable
English 11