HP Kayak XU04 Supplementary Manual page 24

1 How to Install Accessories In Your HP PC Workstation
Installing Mass Storage Devices
3 If installing a drive in a 5.25-inch shelf, remove the drive tray and put
it in a safe place.
4 If necessary, mount the drive onto the drive rails provided.
5 Slide the drive into the shelf.
6 Secure the drive in position using the screws provided with the drive.
7 Locate the appropriate data cable for the device (refer to page 8).
To improve access, you may need to disconnect any devices already
connected to the SCSI cable and allow the cable to hang outside the
of the PC Workstation's case.
16 English
Mounting Rails
Secure the
drive in position
Remove the
drive tray if
installing a
5.25-inch
drive
Slide the drive
into position