Installing Memory - HP Kayak XU04 Supplementary Manual

1 How to Install Accessories In Your HP PC Workstation

Installing Memory

Installing Memory
Main Memory Modules
If you need more main memory, you can install up to 2 GB of memory in
four DIMM slots. For details of supported memory, refer to "Supported
HP Accessories", on page 2.
To install a main memory module:
1 Disconnect the computer's power cord and any LAN or
telecommunications cables.
2 Remove the computer's cover (refer to page 3).
3 Remove the HP UltraFlow airflow guide (refer to page 5).
4 Remove the Ultra wide 16-bit SCSI cable from the system board.
5 Remove the floppy disk drive data cable from the system board.
The location of the memory module slots (with retaining clips open) is
shown here.
6 English
Mem 4
Mem 1