Set Pre-Record; Set Post-Record; Set Overwritten Record - HIKVISION Ultra Series User Manual

Body Camera User Manual
Steps
1. Select Set → Camera → Multi-Line OSD .
2. Enable Multi-Line OSD.
3. Select OSD to set OSD information.
Result
The OSD information will be overlaid on the videos and pictures.

7.11 Set Pre-Record

You can set the time to record before the recording start time.
Steps
1. Select Set → Camera → Record Param. → Pre-Record .
2. Select the pre-record duration.

7.12 Set Post-Record

You can set the time to record after the recording end time.
Steps
1. Select Set → Camera → Record Param. → Post-Record .
2. Select the post-record duration.

7.13 Set Overwritten Record

You can enable overwritten record to keep recording when the available memory is insufficient,
and the former recorded videos will be overwritten.
Steps
Caution
If you enable overwritten record, back up the important data in time, or they will be overwritten.
1. Select Set → Camera → Record Param.
2. Enable Overwrite.
3. Enter the device password.
Result
When the available memory is less then 150 MB, delete video files without a tag until the available
memory is larger than 1 GB.
19