Chapter 3 Basic Operation; Startup And Shutdown; Charge; Turn On Led Lights - HIKVISION MCH508 Quick Start Manual

3.1 Startup and Shutdown

 Startup: Hold the On/Off button for 3 seconds until the indicator displays red. Then the device
vibrates for 1 second, indicating the device has started up.
 Shutdown: Hold the On/Off button for 3 seconds until the indicator changes to green. Then
the device vibrates twice with each vibration lasting for 0.5 second, indicating the device is
shut down.
Vibration is enabled by default. You can disable vibration via Portable Device Assistant application.
Refer to the application user manual for details.

3.2 Charge

When the device is out of power, charge it or change the battery in time.
Step 1 Open the USB Type-C interface cover.
Step 2 Insert one end of USB cable to the USB Type-C interface, and the other end to the power
adapter, and connect the power adapter to the power supply.
 Use the matched power adapter to charge the device.
 Quick charging is enabled by default. In quick charging mode, all the functions are disabled.
You can disable the function via Portable Device Assistant application. Refer to the
application user manual for details.

3.3 Turn on LED Lights

When the environment is dim or dark, or in emergency condition, you can press LED light button to
turn on LED lights for light supplement or emergency illumination.

3.4 Record

Recording starts once the device starts up. Recording stops once the device is shut down. Refer to
3.1 Startup and Shutdown for details.
Helmet Camera Quick Start Guide

Chapter 3 Basic Operation

14