Connect To Isup Platform; Upload To Ftp - HIKVISION Ultra Series User Manual

5.3.2 Connect to ISUP Platform

ISUP is the platform access protocol. You can log in to the device via the platform to realize live
view, data management, and so on.
Before You Start
Set the connected platform. Refer to the platform user manual for details. Ensure the device can
communicate with the platform normally.
Steps
1. Select Set → Network → ISUP .
2. Enable ISUP Connection.
Note
After enabling platform connection, reboot the device to take the new settings into effect.
3. Select ISUP to set IP, Port, and other parameters.
Note
The device ID should be the same as the ID set on the platform.
4. Optional: You can do the below operations.
Enable Force Sub-Stream
View the platform
information

5.4 Upload to FTP

You can upload the video, audio, and picture files stored in the device to the FTP server.
Before You Start
Allocate the FTP server, and ensure the device can communicate normally with the server network.
Steps
1. Select Set → Network → FTP .
2. Enable FTP.
3. Select FTP to set the FTP server parameters.
4. Enable Video Upload, Pic. Upload or Audio Upload according to your needs.
5. Optional: You can do the below operations.
Automatically delete local
files
View the file upload status
Body Camera User Manual
Enable Force Sub-Stream to force the platform only to
transmit via the sub-stream.
Select ISUP Information to view the information.
Enable FTP Upload Delete, and the local files will be
automatically deleted after uploaded to the FTP server.
Select FTP Information to view the file upload status.
12