Shut Down And Sleep; Shut Down; Shut Down Forcedly; Sleep Manually - HIKVISION Ultra Series User Manual

Body Camera User Manual
Result
The device will reboot automatically. All the parameters will be restored to the factory settings,
and the multi-users information will be cleared.

8.12 Shut down and Sleep

8.12.1 Shut down

After the device starts up, hold the startup/shutdown button on the device side to shut it down.

8.12.2 Shut down Forcedly

If the device cannot be shut down normally, you can hold the startup/shutdown button on the
device side for 15 seconds to shut it down forcedly.

8.12.3 Sleep Manually

After the device starts up, press the startup/shutdown button on the device side to sleep the
device.

8.12.4 Sleep Automatically

You can set the device to sleep automatically to save power if there is no operation within a certain
time.
Steps
1. Select Set → System → Power Supply → Auto-Lock .
2. Select time.
Note
If you select OFF, the screen will always on no matter if there is operation or not.
Result
If no operation is done within the set time, the device will sleep automatically.

8.12.5 Wake up

When the device is sleeping, you can press any button except the alarm button and the buttons
below the screen to wake it up.
25