Connect To Platform; Connect To Ehome Platform - HIKVISION Ultra Series User Manual

Set the static Wi-Fi
Result
The white Wi-Fi connection icon appears on the status bar, indicating the Wi-Fi is connected.
What to do next
Swipe the screen down after the first successful connection, and tap the Wi-Fi icon on the
notification bar to enable or disable the Wi-Fi.

5.3 Connect to Platform

5.3.1 Connect to EHome Platform

EHome is the platform access protocol. You can log in to the device via the platform to realize live
view, data management, and so on.
Before You Start
Set the connected platform. Refer to the platform user manual for details. Ensure the device can
communicate with the platform normally.
Steps
1. Select Set → Network → EHome Platform .
2. Enable Platform Connection.
Note
After enabling platform connection, reboot the device to take the new settings into effect.
3. Select Platform to set Address, ID, and other parameters.
Note
The device ID should be the same as the ID set on the platform.
4. Optional: You can do the below operations.
Enable Force Sub-Stream
Enable Pic. Auto Upload
View the platform
information
Body Camera User Manual
a. Select Static Wi-Fi.
b. Enable Connect Static Wi-Fi.
c. Select Set Static Wi-Fi to set IP, Mask, and other
parameters.
Enable Force Sub-Stream to force the platform only to transmit
via the sub-stream.
Enable Pic. Auto Upload, and the captured pictures will be
automatically uploaded to the platform.
Select Platform Information to view the information.
11