Chapter 6 Group Intercom - HIKVISION Ultra Series User Manual

You can realize group intercom via the device.
Before You Start
The device is connected to the platform.
●
Register the device on the group intercom service configuration interface via the web browser.
●
Steps
1. Select GroupTalk on the main menu.
2. Set platform parameters.
1) Select Platform.
2) Select Group Intercom to choose group intercom mode.
3) Set IP Address, Port, and other parameters.
3. Go back to the login page, enter the registered User Name and Password on the group intercom
service configuration interface, and select Login.
After login, you will enter Group List page. The device will show the group list which is managed
by the central platform automatically.
4. Select a group to view group members and status.
5. You can do the below operations.
Set current group
Make an audio
call
Body Camera User Manual

Chapter 6 Group Intercom

Figure 6-1 Group List
On Group Member page, select Set now group., and select OK. Then,
you can see the red Now group yet. prompt.
On Group Member page, select an online member, and select Audio Call
to make a full-duplex audio call. After the member received, you can
13