Advertisement
Quick Links
Mobile Turret Camera
User Manual
UD00719B
User Manual
Thank you for purchasing our product. If there are any
questions, or requests, please do not hesitate to
contact the dealer.
This manual applies to the models below:
Type
Model
Type I Camera
DS-2CS58C2P(N)-S/F
Type II Camera
DS-2CS58C2P(N)-ITS/F
Type III Camera
DS-2CS58C2P(N)-ITS/C
This manual may contain several technical incorrect
places or printing errors, and the content is subject to
change without notice. The updates will be added to
the new version of this manual. We will readily improve
or update the products or procedures described in the
manual.
0100001060301
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for HIKVISION UD00719B
Summary of Contents for HIKVISION UD00719B
-
Page 1: User Manual
Mobile Turret Camera User Manual UD00719B User Manual Thank you for purchasing our product. If there are any questions, or requests, please do not hesitate to contact the dealer. This manual applies to the models below: Type Model Type I Camera... -
Page 2: Regulatory Information
Privacy Notice Surveillance laws vary by jurisdiction. Check all relevant laws in your jurisdiction before using all this product for surveillance purpose to ensure that your use of this product conforms. Regulatory Information FCC Information FCC compliance: This equipment has been tested and found to comply with the limits for a digital device, pursuant to part 15 of the FCC Rules. - Page 3 1 Introduction 1.1 Product Features This series of camera adopts high performance sensor and advanced circuit board design technology. It features high resolution, low distortion, and low noise, etc. It is suitable for surveillance system and image process system. Low illumination, 0.1 ...
-
Page 4: Installation
2 Installation Before you start: Please make sure that the device in the package is in good condition and all the assembly parts are included. Make sure that all the related equipment is power-off during the installation. Check the specification of the products for the installation environment. ... - Page 5 2.2 Installation of Type II Camera Disassembling Step 1. Open the lock catch of camera according to the direction of arrow on the catch. Step 2. Take apart the base plate. Step 3. Apart the main body of the camera from the enclosure.
- Page 6 Step 3. Fix the base plate onto the wall with screws. (wall mounting with screws) Step 4. Install the camera onto the wall. Step 5. Make sure the enclosure is properly fixed with the base plate. NOTE: Insert the clips of enclosure into the slot of the base plate.
- Page 7 Step 2. Loosen the fixing screw and take apart the enclosure. Step 3. Route the cable through the cable hole. (in the cable notch) Step 4. Fix the base plate onto the wall with screws. Step 5. Install the camera onto the ceiling. Step 6.
Need help?
Do you have a question about the UD00719B and is the answer not in the manual?
Questions and answers