Set Record Once On; Set Quick Charging Mode; Switch Usb Mode; Set Read-Only Usb Mode - HIKVISION Ultra Series User Manual

7.14 Set Record once On

The device will start recording when startup after the function is enabled.
Steps
1. Select Set → Camera → Record Param.
2. Enable or disable Record once On.

7.15 Set Quick Charging Mode

You can enable or disable quick charging mode.
Steps
1. Select Set → System → Power Supply .
2. Enable or disable Quick Charging Mode according to your needs.
- Enable the quick charging mode, and all the power consuming functions, such as network,
record, positioning, etc., will be disabled automatically. The fully-charged duration will be
shorten.
- Disable the quick charging mode, and the device can be operated normally while being
charged. The fully-charged duration will be longer than the quick charging mode.

7.16 Switch USB Mode

You can switch the device to USB mode to import or export data.
Before You Start
Connect the device to the computer via a data cable.
Steps
1. Select Set → System .
2. Enable Auto USB Mode.
3. Enter the device password.

7.17 Set Read-Only USB Mode

After switching to the USB mode, you can set the video, audio, and picture files to be copied to the
computer only, but cannot be deleted locally.
Steps
1. Select Set → System .
2. Enable or disable Readonly USB Mode.
- Enable the read-only USB mode, and after switching to the USB mode, the video, audio, and
picture files can only be copied to the computer, but cannot be deleted locally.
Body Camera User Manual
20