Set Network Stream Parameters; Set Audio Encoding Type; Set Capture Parameters; Set Multi-Line Osd - HIKVISION Ultra Series User Manual

7.8.3 Set Network Stream Parameters

You can set the network stream parameters when previewing the device via platform.
Steps
1. Select Set → Camera → Net Trans. Param.
2. Set the parameters below.
Net Resolution
The higher the resolution is, the clearer the image will be. Meanwhile, the network
bandwidth requirement is higher.
Net Bitrate
Select relatively large bitrate if you need good image quality and effect, but more storage
spaces will be consumed. Select relatively small bitrate if storage requirement is in priority.
Net Frame Rate
It is to describe the frequency at which the video stream is updated and it is measured by
frames per second (fps).
Network Stream
Select transmit video stream or mixed stream.

7.8.4 Set Audio Encoding Type

The audio encoding type will affect the quality of audio.
Steps
1. Select Set → Camera → Intercom Audio .
2. Select audio encoding type according to your needs.
What to do next
Reboot the device to take the new settings into effect.

7.9 Set Capture Parameters

You can set the captured picture resolution.
Steps
1. Select Set → Camera → Picture Quality .
2. Select the picture resolution.

7.10 Set Multi-Line OSD

You can set the overlay information on the videos and pictures.
Body Camera User Manual
18