Zeiss AxioCam ERc 5s User Manual page 41

6 Remote Control and OSD menu | 6.2 On Screen Display Menu
Menu entry
Video Encoder
Sharpening
Snapshot Res
(Res = resolution)
Snapshot Delay
AxioCam ERc 5s | V 1.0 en
Description
The live image and video recordings are influenced by this setting. The following
settings are possible:
¢
FPS:HALF BR:HIGH: Half frame rate, high data rate (8 Mbit / s)
¢ FPS:HALF BR:MID: Half frame rate, medium data rate (4 Mbit / s)
¢
FPS:HALF BR: LOW: Half frame rate, low data rate (2 Mbit / s)
¢
FPS:FULL BR:HIGH: Full frame rate, high data rate (8 Mbit / s)
¢
FPS:FULL BR:MID: Full frame rate, high data rate (4 Mbit / s)
¢
FPS:FULL BR:LOW: Full frame rate, low data rate (2 Mbit / s)
Half frame rate results in improved image quality with the same data rate.
Value range: 0 to 3.
Edge flickering may occur in some HDMI monitors with a default value of 3, but
this will disappear with lower values.
The resolution for snapshots captured to the SD card can be defined here. The
following modes can be set:
¢
as monitor on the HDMI port
– 1920x1080 (16:9 side ratio), when the camera is in 1080p mode (see
default settings)
– 1280x720 (16:9 side ratio), when the camera is in 720p mode (see default
settings)
Advantages: Acquisition lasts < 1 second, small file sizes due to comparatively
low resolution.
¢
5 MP
– 2560x1920 (4:3 side ratio) – full sensor resolution, 5 megapixels
Advantages: full resolution, wider vertical image field.
¢
2560x1440
– 2560x1440 (16:9 side ratio)
Advantages: high resolution (3.7 megapixels), same image field as in live
image.
This setting is useful when images are to be captured using the Capture button
on the camera. Because pressing the button causes the microscope to shake,
motion blur would be visible in the image with immediate exposure. This effect is
eliminated by snapshot delay.
The snapshot delay can be set between 0 and 10 seconds.
41