Limitation Of Liability; Warranty - Zeiss AxioCam ERc 5s User Manual

2 Safety | 2.2 Limitation of liability
16
NOTICE
To avoid equipment damage, data loss or corrupted data, read and adhere the
safety notes below.
¢
Protect the camera against mechanical impact. External damage may affect
the operation of inner components.
¢
Keep chemicals and fluids away from the camera.
¢ Make sure there is sufficient ventilation of the camera head. Avoid direct
exposure to sunlight and locations near heat sources (radiators, stoves).
Overheating can cause noisy images.
¢
Use the camera in a clean and dry location.
¢
Attach all connectors firmly and securely.
¢
Use only the accessories supplied by ZEISS, when applicable.
¢ Use only normal microscope cleaning material to clean the camera housing.
¢
Contact your local ZEISS service organization, if a repair is necessary.
¢ Save all your data, such as images, measurement data, archives, reports,
forms and documents, at regular intervals on an external storage medium.
Otherwise it cannot be avoided that access to this data may be lost as a
result of operational errors or hardware defects. ZEISS accepts no liability for
consequential damage resulting from insufficient data protection.

2.2 Limitation of liability

No warranty shall be assumed by ZEISS during the warranty period if the equipment
is operated without observing the safety regulations. In any such case, ZEISS shall
be exempt from statutory liability for accidents resulting from such operation.

2.3 Warranty

ZEISS shall be exempt from any warranty obligations should the user fail to observe
the safety regulations. ZEISS only guarantees the safety, reliability, and performance
of the system if the safety notes are closely observed.
AxioCam ERc 5s | V 1.0 en