Connecting The Camera To A Display (Without Pc) - Zeiss AxioCam ERc 5s User Manual

5 Connecting the camera | 5.3 Connecting the camera to a display (without PC)
Prerequisites ¢
Procedure 1
32

5.3 Connecting the camera to a display (without PC)

The camera can be connected to a monitor, TV or projector for visualization of the
live image data. The data at the HDMI output is in DVI format. Further HDMI
functions (e.g. audio, communication between monitor and camera) are not
supported. To enable the display of HD quality, it is recommended that only HD-
capable devices be connected.
Illustration 4: Connecting the camera to a display / projector
The monitor / projector has been set to 720p60.
Insert the HDMI cable into the HDMI port of the camera (1 and 2).
2
Insert the other end of the HDMI cable into the monitor / projector. Secure the
HDMI plug on the jack on the monitor / projector (3).
Info
If the monitor / projector has a DVI port and no HDMI port, an HDMI / DVI
adapter cable or HDMI / DVI adapter will be required for the visualization of
image data (4).
3 Set the monitor / projector's aspect ratio to 1:1 or Aspect. Refer to the
documentation provided by the monitor / projector's manufacturer.
4
For further camera settings using the on-screen display menu (OSD), the
remote control is required, see chapter Remote Control [} 37].
AxioCam ERc 5s | V 1.0 en