8 Acquiring images | 8.4 Image acquisition with Labscope
AxioCam ERc 5s | V 1.0 en
Info
If you do not see a focused image, refocus the sample on the microscope. You
can activate the focus bar as an additional aid. Open the context menu in the
Center Screen Area via a right mouse click. Select the entry Focus Bar. The
focus bar will be shown.
5
Click on the Snap button.
You have successfully acquired your first image with ZEN blue. Save the image in
the file system via the menu File | Save as.
8.4 Image acquisition with Labscope
Upon first starting Labscope, each screen starts with an overlaying information
screen explaining the functions. Refer to these information screens for using
Labscope. To disable or to re-enable all the information screens, go to the
Labscope settings, which is found in the Settings menu on your iPad.
For further support in using Labscope see www.zeiss.com/microscopy/community.
53