Installing Zen Software And Drivers; Installing Labscope App - Zeiss AxioCam ERc 5s User Manual

7 Installing software and drivers | 7.1 Installing ZEN software and drivers
Prerequisites
Procedure
AxioCam ERc 5s | V 1.0 en
7 Installing software and drivers

7.1 Installing ZEN software and drivers

¢ To acquire images with the AxioCam ERc 5s on a PC, you must install ZEN
software. You will find the software installation on the DVD delivered. The
camera drivers will be installed automatically during the installation of the
software.
¢ Before starting the installation of the software and drivers the camera must be
connected to the PC, see chapter Connecting the camera to a PC [} 33].
1 Install the software according to the installation guide delivered with the
software.
2 During the installation you will be asked to install the camera drivers. Follow
the procedure by confirming the upcoming messages.
3 Restart your PC after the installation.
4 You can check in the device manager if the driver installation was successfully.
You have installed the software and the camera drivers. You can now start with
acquiring images with your camera.

7.2 Installing Labscope App

From your iPad, go to the iTunes store and search for "Labscope." Install
"Labscope" by Carl Zeiss AG.
47