Connecting The Camera To The Mains Supply - Zeiss AxioCam ERc 5s User Manual

5 Connecting the camera | 5.2 Connecting the camera to the mains supply
Name
USB 2.0 cable
(not supplied)
Plug-in power supply
Output 5 V DC, 1.0 A
(optional)
HDMI cable
(not supplied)
HDMI / DVI adapter cable
(optional)
Ethernet cable
(not supplied)
Prerequisites ¢
Procedure 1
AxioCam ERc 5s | V 1.0 en
Figure
Info
If the ZEISS Labscope app is used, a commercially available WLAN router will be
required.

5.2 Connecting the camera to the mains supply

The power supply has been adapted with the appropriate country-specific
adapter.
Insert the mini USB plug of the USB 2.0 cable into the mini USB port of the
camera.
2 Insert the USB plug of the USB 2.0 cable into the power supply and connect to
a power outlet.
Info
If the USB 2.0 Y cable is used for connection to the mains supply, leave the
second USB plug unused. Using both USB plugs is only required if the device is
to be operated on the PC. In the case of using the camera with a PC, both USB
plugs should be plugged into the PC.
Remarks
Connection between camera and plug-
in power supply
Power cord
100-240 V
50 / 60 Hz
Connection between camera and
monitor, TV or projector
Connection between camera and
monitor / projector
Connection between camera and
network or WLAN router
31