Receiving Both Faxes and Telephone Calls Automatically: Fax/Tel Mode
Set this mode if you want your MultiPASS to automatically switch between voice and fax calls. For
this mode, you need to have a telephone connected to your unit.
What Happens When Fax/Tel Mode is Selected
Chapter 6
Type of call
Telephone
Telephone charges
begin for the caller.
The MultiPASS listens for the fax tone.
RING START TIME
(Factory default
setting = 8 sec.)
The fax tone is not detected.
The MultiPASS starts ringing.
F/T RING TIME
(Factory default
setting =15 sec.)
If you don't pick up the handset
(within 15 sec.).
DEFAULT ACTION
Choose between:
RECEIVE (factory default setting) and DISCONNECT.
(Factory default setting)
Not all fax machines are capable of sending a fax
tone. For those cases if you set the DEFAULT
ACTION to RECEIVE, the MultiPASS switches to
receive mode automatically and starts receiving
the document. If no document comes in, it
disconnects after approximately 55 seconds.
Fax
Sending document
Sending document
manually
The MultiPASS answers without ringing.
(For 8 sec.)
The fax tone
is detected.
received automatically .
(The fax tone is
detected and the
MultiPASS switches
to receive mode.)
The MultiPASS
disconnects the call.
RECEIVE
Fax
automatically
The document is
Pick up the
handset to talk.
DISCONNECT
Receiving Faxes
6-4