Canon MultiPASS C560 User Manual page 221

4. Press
Start / Scan
begin scanning automatically.
I
I
I
n
If a number is busy, the unit will continue sending to the other destinations and then redial the
G
number that was busy.
If the MultiPASS memory becomes full while scanning your document, MEMORY FULL
G
appears in the LCD display. If this happens, remove the remainder of the document from the
ADF (you may need to open the operation panel to do so), then divide the document into
several sections and send each section individually.
The document is automatically deleted from memory when sequential broadcasting is
G
completed.
Chapter 5
to begin scanning for sending, or wait a few seconds for the MultiPASS to
Start/Scan
The MultiPASS then scans the document into memory, and begins sending it to the
destinations.
You will see a series of brief messages showing details on the transmission.
To cancel sending, press
Sending to all destinations you specified in step 3 will be canceled. (You cannot cancel
only one destination.)
. You will be asked to confirm canceling. Press
Stop
to cancel.
T
Sending Faxes 5-26