Canon MultiPASS C560 User Manual page 157

Using the Enlarge/Reduce Option
You can use the Enlarge/Reduce option to increase your document printing size by up to 400
percent or reduce it to as low as 10 percent of the original document size. When you change
the enlarge or reduce rates, however, you also change the printable area of your document,
which may result in only a partial printing of your document.
There are two ways to enlarge or reduce your document. You can either specify a different
paper size from the one specified in the software application, or you can specify the rate of
enlargement or reduction of the document size.
To enlarge or reduce by changing the printing paper size:
1. In the Paper Size list, select the paper size specified in the software application (you can
usually find this by looking at the Page Setup option in the software application).
2. Click Enlarge/Reduce.
3. In the Printer Paper Size list, select the actual paper size that is in the printer. The percent
by which your document is enlarged or reduced automatically adjusts to the printer paper
size you specified.
4. Click OK.
Chapter 3 Printing 3-60